CirculenRecover HD5603 Grey Plus is a circular high density polyethylene grade supplied in pellet form for blow molding and extrusion applications. This grade is characterized by its low residual odor and easy processability.
Sustainability
According with the requirements of Standard ISO 14021:2016, CirculenRecover HD5603 Grey Plus contains at least 98% of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.1%. Based on CIELab values, the color indication is close to RAL 7012.
This product is not intended for highly regulated applications including food contact, potable water contact,
medical and pharmaceutical applications.
CirculenRecover HD5603 Grey Plus
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.40 g/10 min |
| Melt Flow Rate (190 °C/5.0 kg) | 1.8 g/10 min |
| Density | 0.956 g/cm³ |
| Bulk Density | >0.500 g/cm³ |
| Tensile Modulus | 1200 MPa |
| Tensile Stress at Yield | 24 MPa |
| Tensile Strain at Yield | 9 % |
| FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) | 8 hr |
| Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) | 2.5 kJ/m² |
| Ash | < 2 wt % |
| Melt Temperature | 180 - 210 °C |
Technical Data Sheet
Technical Data SheetProcess
Extrusion Blow Molding, Sheet and Profile Extrusion
Resin
High Density Polyethylene
Applications
Bottles For Consumer Goods, Bottles for Industrial Use, General Sheet Extrusion